HSV RGB IKEA lamp + IR Remote

My first Awesome IKEA lamp had multiple trimmers and push buttons to setup speed, brightness and color. I now added a remote control to get rid of all these. I chose one of these common rgb remote controls that are shipped with every other cheap rgb lamp. I got it from dx.com. The led i use is a 3W rgb star led from ebay with the following specifications:

Red=2,4V, Green=3,4V, Blue=3,4V, 350mA per channel

Make sure you do not get one with common “+”; if so you can’t use p mosfets but must use the n version instead. Common ground is no problem. You’ll get a complete partlist from the eagle file. The main changes from the original layout are:

  • P_MOSFET: IRLML6402
  • IR-RECEIVER: TSOP 31238
  • IR_REMOTE: CR2025

hsvrgblamp1.0

I uploaded everything including the schematic, board and the code: Download!

The code is neither commented nor nice. Feel free to improve it 😉 There is a little problem with this version; the p-mosfets seem to have great leakage current so the leds wont turn off completely. I think the PORTD has to little output power…

Advertisements

One thought on “HSV RGB IKEA lamp + IR Remote

  1. I have been browsing online more than three hours today, yet I never found any interesting article like yours. It is pretty worth enough for me. Personally, if all web owners and bloggers made good content as you did, the internet will be much more useful than ever before.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s